Model E Screw Press for Manure Separation
Advanced Screw Press Technology for Effective Solids Removal
The Model “E” Manure Separator is designed for manure slurry separation and priced for the mid-sized producers, but it performs like a high end press.
The Model “E” addresses four major issues involved with manure management and the mid-size producer: Economics, Easy installation, Efficiency and Environment. The Model “E” can be set-up and installed with little or no difficulty.
The efficient design produces a dry solid that can be easily composted and used for bedding. The design also insures high capture efficiency, so that a majority of the manure is in your dry solids stack and not the lagoon.
Prev
Next
Features
- All Models
- Screen: 0.025″ or .035″ slots 304SS
- Discharge Dryness: 37-43% solids (moisture 63-57%) dairy manure solids
- Welded base and frame assembly painted with 2 coats Orange and nickel epoxy.
| Model E 6 | Model E 10 | Model E 16 | |
|---|---|---|---|
| Screw Shaft Diameter | 6″ | 10″ | 16″ |
| 240/480 3 phase Motor | 5 HP | 10 HP | 38 HP |
| Capacity – dairy manure solids at 6% or less | 10~20 GPM | 35~75 GPM | 100~140 GPM |
| Performance on 24/7 operational basis | 350 Cows | 1000 Cows | 3500 Cows |
Guaranteed Consistent Dryness
- High % Dryness on Discharge Solids
- Reduced Disposal Acreage
- Reduced Waste Hauling
Compliance with Environmental Standards
- Reduce Pollutants and Environmental Impact
- Recycle Solids as Bedding/Feed Compost
- Long Term Odor Free, Pest Free Storage
Downloads
- Literature: Agri-Press® Model E Screw Press
- Presentation: Model E Screw Press Presentation